🚨Share to inspire🚨 Products used⤵️ • Stripped the top with Klean Strip and finish sanded with 220 grit on an orbital sander • Prep cleaned and sanded the chest with a decreasing cleaner and 220 grit sandpaper • Primed with Zinsser Bullseye tinted to a light gray • Painted with a custom mix of General Finishes Lamp Black and our signature color Backroads • Topcoat with General Finishes High Performance in Flat • Sprayed with Earlex Spraystation • Custom paper from Spoonflower. This was a custom

Here's how⤵️ 1. Brush on - We use Klean Strip and a basic chip brush. Brush it on and allow it to set for 15 - 20 min. Touch up any areas that dry out during that time. 2. Scrap off - Use a solvent proof plastic scraper to remove the excess. We use a plastic drop sheet to collect the residue on the floor for easy cleanup. 3. Scrub with water - this is the KEY. Use a scrub brush to remove residue. Great for areas that are difficult to sand. You can use After Wash instead of water if desired, but

🚨Share🚨 Products used⤵️ 1. Brush on - We use Klean Strip and a basic chip brush. Brush it on liberally and allow it to set for 15 - 20 minutes. Touch up any areas that dry out during that time. Some stubborn finishes may require repeat applications. 2. Scrap off - Use a solvent proof plastic scraper to remove the excess. We use a plastic drop sheet to collect the runoff residue on the floor that makes for easy cleanup. 3. Scrub with water - this is the key trick. Use a scrub brush with water t